News

Home / News / Industry News / What are the instructions for the use of polyurethane solid tires?

Polyurethane is widely used in tire manufacturing in various industries. It has strong impact resistance, abrasion resistance, hydrolysis resistance, tensile strength, tear strength, oil resistance, etc., but it should also be used safely. , the following Zhejiang Kunrong Rubber Technology Co., Ltd will share with you the instructions for the use of polyurethane solid tires.






Instructions for use are as follows:
1. When the wind pressure of the polyurethane solid tire is too low, the rolling resistance of the tire will become larger, which will cause abnormal heat and stress, and cause the tire to be partially peeled off and damaged;
2. When the wind pressure of the polyurethane solid tire is too high, not only will the ground contact area be small and the braking performance of the tire will be reduced, which will affect the driving safety, but also the driving comfort will be deteriorated due to the ability of the tire to absorb vibration frequency;
3. Different types of tires with different patterns or old and new tires should not be installed on the same axle;
4. The abnormal load will cause the tire to be overloaded and fail. Please ride in accordance with the load limit of the depot, and do not overload;
5. Overspeeding will cause the internal temperature of the tire to rise excessively, and the reduction of the rubber adhesion will eventually lead to failure;
6. Before combining the rim and tire of the polyurethane solid tire, please clean the rim and tire first, and no debris should be left inside.

Hot Products