News

Replacing solid tires is a common problem encountered by many drivers and repairers. It is not an easy job, and it is necessary to understand the corresponding methods and skills. Let's take a look at it together.

1. First use a hydraulic jack to jack up the body structure

Use a wrench to loosen the screws before jacking up the body, as it won't work if the wheel is in the air. The hydraulic control jack should be placed on a flat ground, and it should be avoided that there is no fulcrum and instability. Just jack up the car until the tires are off the ground.

2. Then turn the screw

Before turning the screw, place the spare tire on the bottom of the car, so that we can effectively avoid the hydraulic control jack in the process of screwing the design. In the process of screw design, the wrench and the ground are at a 45-degree angle, which can better control the force.

3, followed by unloading the tire.

In the process of unloading the tire, if the Chinese tire is too stuck, you can alternately kick the left, right and lower parts of the tire with your feet to make the tire loose. When you move the tires with your hands, cover your hands with gloves or a cloth as much as possible. Stains and oil on tires are no ordinary dust. It's hard to find a place to wash your hands after changing tires at a loss (movie).

4. Finally install the tires.

The weight of solid tires and wheels is still very heavy. If we want to install Chinese tires at one time, can it be easy? You can cover the tire first, and then align the screw holes. When screwing a screw, you must strictly follow the principle of students' diagonal screwing. After screwing a production screw, screw the screw at the opposite corner. Do not screw clockwise or counterclockwise one by one.