News

At present, solid rubber tires are generally only used in high-load vehicles and machinery running at low speeds, and are also used in fixed-position machinery compared with pneumatic tires, because solid rubber tires are more wear-resistant. How to deal with the damaged solid tire of forklift truck? Let's popularize it with Zhejiang Kunrong Rubber Technology Co., Ltd. below!

1. When the inner tube is found to have small holes, it can be hot or cold. File the roughness around the damage of the inner tube, stick the fire repair glue on the damage, and make the hole just in the middle of the repair glue, then install the tire repair clip against the normalizing glue, tighten the screw and then ignite The heating agent on the fire repair glue can be tightly bonded after 10-15 minutes.

 

2. When the outer tire of the solid rubber tire has cracks, holes, blistering, delamination and other damages, it should be repaired or renovated according to the specific conditions. When there are successive cracks around the tire carcass, the tread rubber has been polished and there are large holes, the carcass line layer has annular ruptures and the whole circle is separated, it should be replaced in time.

 

3. To be replaced in time: If the inner tube has problems such as folding, serious rupture, aging, stickiness, deformation, etc. that cannot be corrected, it needs to be replaced in time. Develop to check the tire pressure regularly, as far as possible, check it every other month. If the tire pressure is not enough, you should make up for it in time. Everyone should also check regularly before going on the highway to ensure the safety of driving.